SMC Electric Actuators

Product Details:

• The transportation, pushing and length measurement systems have been miniaturized through the use of a linear motor.
• Thickness 9 mm, Weight 130 g (at stroke 10 mm)
• Moving magnetic type linear motor
• Linear guide with circulating balls
• Positioning repeatability +-5 m
• Pushing measurement accuracy +-10 m
• Easy programming (Cycle time entry)
• Just input 3 parameters Positioning time, Target position, Load mass.

Product Details:

• Clean specification: Complies with ISO Class 4 (ISO14644-1) (11-LEFS)
• Compatible controllers: LECP6, LECA6, LECP1, LECPA, LECPMJ
• High output motor (100/200/400 W)
• Improved high speed transfer ability
• High acceleration/deceleration (20000 mm/s2)
• Pulse input type
• With internal absolute encoder
• Positioning repeatability: +-0.02 mm
• Clean specification: Complies with ISO Class 4 (ISO14644-1) (11-LEFS)
• Compatible controllers: LECSA, LECSB, LECSC, LECSS

Product Details:

• Pulse input type
• With internal absolute encoder
• Positioning repeatability: +-0.06 mm
• Compatible drivers: LECSA, LECSB, LECSC, LECSS
• Motorless specification available

Product Details:

• Low profile, low center of gravity
• Can be combined with various guides
• High maintainability
• Motor mounting position: Above or below, right or left selectable
• Solid state auto switch can be mounted for limit confirmation and intermediate signal confirmation
• Selectable controllability (Controller)
• Complete control like an air cylinder (allows for 12 point intermediate stop) Easy position setting by value input
• Compatible controllers: LECP2, LECP6, LECP1

Product Details:

• Low-profile/Flat Height: 48 mm
• Profile reduced by side mounting of motor
• No interference with motor, even with large workpieces.
• Auto switch mountable (Made to Order)
• Positioning repeatability: +-0.1 mm
• Compatible controllers: LECP6, LECP1, LECPMJ

Product Details:

• Direct mounting: 3 directions, Bracket mounting: 3 types
• Auto switch can be mounted.
• Speed control/Positioning: Max. 64 points
• Either positioning or pushing control can be selected.
• Possible to hold the actuator with the rod pushing
• to a workpiece, etc.
• Positioning repeatability: +-0.02 mm or less
• Dust/Drip proof (IP65) specification
• Compatible controllers: LECP6, LECA6, LECP1, LECPA, LECPMJ
• High output motor (100/200/400 W)
• Improved high speed transfer ability
• High acceleration compatible (5,000 mm/s2)
• Pulse input type
• With internal absolute encoder
  
  

Product Details:

• Compact integration of guide rods
• Achieves lateral load resistance and high non-rotating accuracy.
• Lateral end load: 5 times more (compared with rod type, size 25 and
• 100 stroke)
• Compatible with sliding bearing and ball bushing bearing.
• Compatible with moment load and stopper (sliding bearing).
• Speed control/Positioning: Max. 64 points
• Positioning and pushing control can be selected.
• Possible to hold the actuator when pushing the rod to a workpiece, etc.
• Positioning repeatability: +-0.02 mm or less
• Compatible controllers: LECP6, LECA6, LECP1, LECPA, LECPMJ
• High output motor (100/200 W)
• Improved high speed transfer ability
• High acceleration/deceleration compatible (5,000 mm/s2)
• Pulse input type
• With internal absolute encoder

Product Details:

• Direct mounting: 3 directions, Bracket mounting: 3 types
• Auto switch can be mounted.
• Speed control/Positioning: Max. 64 points
• Either positioning or pushing control can be selected.
• Possible to hold the actuator with the rod pushing to a workpiece, etc.
• Positioning repeatability: +-0.02 mm or less
• Compatible controllers: LECP6, LECA6, LECP1, LECPA, LECPMJ
• High output motor (100/200/400 W)
• Improved high speed transfer ability
• High acceleration/deceleration compatible (5,000 mm/s2)
• Pulse input type
• With internal absolute encoder

Product Details:

• Compact: Compared with the LESH, Workpiece mounting surface height: Reduced by up to 12%.
• Vertical work load: Increased by up to 50%
• Lightweight: Reduced by up to 29%
• Max. pushing force: 180 N
• Positioning repeatability: +-0.05 mm
• Possible to reduce cycle time
• Max. acceleration/deceleration: 5,000 mm/s2
• Compatible controllers: LECP6, LECA6, LECP1, LECPA, LECPMJ

Product Details:

• Easy setting: Data can be set with only 2 items, position and speed.
• The controller is already set with the data of the actuator.
• (The actuator and controller are sold as a package.)
• Integration of the guide rail and the table.
• Uses a recirculating linear guide for high rigidity and high precision.
• Reduced cycle time
• Max. acceleration and deceleration: 5,000 mm/s2
• Max. speed: 400 mm/s
• Maximum pushing force: 180 N
• Positioning repeatability: +-0.05 mm
• Compatible controllers: LECP6, LECA6, LECP1, LECPA, LECPMJ

Product Details:

• Compact and lightweight
• W 20.5 mm x H 30 mm x L 125.6 mm, weight 240 g
• Max. pushing force: 50 N
• Positioning repeatability: +-0.05 mm
• Possible to set position, speed and force (64 points)
• Max. speed (Horizontal): 350 mm/s
• Compatible controllers: LECP6, LECP1, LECPA, LECPMJ

Product Details:

• Easy setting: Data can be set 2 items, position and force.
• The controller is already set with the data of the actuator. (The actuator and controller are sold as a package.)
• Drop prevention function is provided. (Self-lock mechanism is provided for all series.)
• Power consumption reduced by self-lock mechanism.
• Gripping check function is provided.
• Possible to set position, speed and force. (64 points)
• Compatible controllers: LECP6, LECP1, LECPA, LECPMJ

Product Details:

• Pulse input type motor driver
• Compatible motor capacity: 100 W, 200 W, 400 W
• Compatible encoder: Incremental type
• Absolute type
• Servo adjustment using auto gain tuning
• With display setting function

Product Details:

• Suitable for conveyer lines without an air supply.
• Rod end shape
• Chamfered type, roller type and lever type are available.
• Energy-saving
• Power consumption at rod stoppage is reduced by 60%.
• Height and mounting method are compatible with the stopper cylinder Series RSQ.
• Easy setting
• Easy adjustment on site with programless controller
• Applicable to controller/Series LEC which allows detailed settings
• Compatible controllers: LECP6, LECP1

Product Details:

• CC-Link Ver. 1.10 compatible
• External data import function
• Position and speed can be monitored by the PLC touch panel (display).
• Step data can be edited from the PLC touch panel (display).

Product Details:

• A driver that uses pulse signals to allow positioning at any position.
• The actuator can be controlled from the customers' positioning unit.
• Return-to-origin command signal
• With force limit function (Pushing force/Gripping force operation available)

Product Details:

• Easy setting: Data can be set 2 items, position and force.
• The controller is already set with the data of the actuator. (The actuator and controller are sold as a package.)
• Drop prevention function is provided. (Self-lock mechanism is provided for all series.)
• Power consumption reduced by self-lock mechanism.
• Gripping check function is provided.
• Possible to set position, speed and force. (64 points)
• Compatible controllers: LECP6, LECP1, LECPA, LECPMJ

Product Details:

• A support guide is designed to support work pieces with significant overhang.
• Easy installation with the same outer dimensions as Series LEF body, contributes to reductions in man-hour for design and assembly
• Standardly equipped sealing band prevents the scattering of grease and entry of foreign matter from outside.

Product Details:

Additional Information:

• Item Code: EX260